Silt Fence

Home > Products > Silt Fence

Made of woven polypropylene fabric, the purpose of sit fence is to prevent sediment carried by sheet flow from leaving the site and entering drainage natural ways or storm drainage systems by slowing water runoff and causing the deposition of sediment of structure.

Specifications :
Popular Width : 24” to 50”
Length : From small packs of 100 meters to 1000 meters jumbo rolls
Thickness : 60 GSM to 130 GSM
Fabric Construction : 8 x 8 to 16 x 12
UV : As required
Fabric Edges : Heat Cut, Ultrasonic, Selvedge
Fabric also available with marker tapes

Dual Colour Silt Fence

Made using a very special technique this silt fence fabric is in two colours. Our most popular combinations of colour are

  • Green & White
  • Black & White

These fabrics are also available with special reinforcements giving them more strength and sustainability.

Specifications :

Popular Width : 24” to 50”

Length : From small packs of 100 meters to 1000 meters jumbo rolls

Fabric Edges : Heat Cut, Ultrasonic, Selvedge

Reinforcements : Every 30 cms (vertically)

Special Silt Fence

With a Drawstring : A stronger silt fence with a drawstring attached at the top. The drawstring is mainly used to re-tighten the silt fence after a rainfall event. Available in Standard Silt Fence Sizes

With Reinforcements : These fabrics are also available with special reinforcements giving them more strength and sustainability.

There are 3 stripes where the yarn density is higher from the rest of the fabric. In those areas, the fabric mass is 120 gsm or 3.5 oz/yd2, and for the rest of the fabric, it is 108 gsm or 3.2 oz/yd2.